Signs You Need an Oil Furnace Repair

Don’t put off an oil furnace repair when one is needed.

If you sense that your heating system is not working like it is supposed to be, you must learn how to recognize signs when it need an oil furnace repair not to make matters worse. Any problem concerning your heating system arising in the dead of winter must be taken cared of right away, or suffer cold days and nights when the outside temperature is below freezing point. First you would want to troubleshoot it first, here are few suggestions on how to troubleshoot oil furnace http://air-conditioning-edmonton.ca. If you want to get your home heating back on track, don’t put off a much-needed oil furnace repair any longer. The following signs are excellent tip-offs telling you to schedule an oil furnace repair with your local heating contractor the soonest time possible.


A Working Oil Burner but is not Firing
The typical cause of this problem is simply an empty oil tank. During cold Canadian winters, your oil furnace is under undue stress than ever before. You may have arranged for a regular fuel delivery, but you might still face an empty tank because of the high demand for heat. Or, you may have clogged nozzles because of the buildup of sediment on your line all the way from your tank’s bottom. Other likely causes can be an oil pump that’s no longer working or a broken igniter. Fill up the tank with fuel and see if it fixes the problem. If it does not work, call for help from a licensed heating contractor.

A Broken Oil Furnace Burner
Likely causes of a broken burner are either the lack of fuel or power. For blown fuses, you can end up with a broken furnace too. Ensure that the thermostat’s setting is correct before checking if there are any blown fuses. Also, don’t forget for fuel in the tank. Another thing you must check is whetheryou have broken or frayed wires going up to the circuit. You can likewise try setting up the thermostat higher than usual to find out if the system will turn on. It can be anything from a clogged filter to a broken blower motor at the worst.

Smoke Coming from the Burner
The primary reason burners emit smoke is because of clogged nozzles. The often quick fix for this is by making adjustments on the nozzle. But if the nozzle is not the issue here, the likely culprits may be a reduced air flow secondary to a chimney blockage. The proven oil furnace repair for this problem is by adjusting or replacing the nozzle. Having it undergo a combustion analysis will likewise tell you exactly what the cause of this problem is.

Burns Excessive Fuel
Once you realize your furnace consumes excessive fuel, you might need to make some adjustments to it. First, check the furnace’s condition and recall when it was last cleaned. Also, your home insulation is a crucial factor in determining furnace controls over your home indoor temperature. Drafty windows and doors waste a lot of energy since it sucks out more heat from the inside than what your furnace can typically produce. Schedule an inspection so that experts can check the severity of those drafts. Furthermore, don’t forget to take a closer look at your duct system. You can only ensure that no air escapes your home when the system is sealed properly.

Fumes in your Home
It is not normal to smell burning furnace within your home. Clogged nozzles often cause issues involving the appearance of smoke, along with not having the right end cone in a furnace or a cracked heat exchanger. It is risky, and you have to call a professional to clean your chimney if the issue persists even after changing your nozzle.

Don’t fret in case you’ll need an oil furnace repair. Normal wear and tear affect your system’s efficiency, and at times, you can’t avoid experiencing some issues with it because of constant use.

Post a comment

Private comment

Search form
Display RSS link.
Link
Friend request form

Want to be friends with this user.